Jome Commodity Co., Ltd

is a Ningbo based household products manufacturer, established in the year of 2011!

Home > News > Content
Mirror Mainly Coated With Anti-fog Mirror
- Jul 12, 2017 -

Mirror Mainly coated with anti-fog mirror

Why is the mirror afraid of moisture, mirror glass before use, generally have been ruled. Water vapor is easy to go through the glass knife from the side of the mirror into the mirror, corrosion mirror, resulting in mildew, rust point. Therefore, may wish to buy back the mirror, the first side of the mirror coated with a layer of paint, while also coated with a layer on the back.

1, do not touch the mirror with a wet hand, do not wipe the mirror with a damp cloth, to avoid increasing the moisture into;

2, the mirror can not come into contact with salt, grease and acidic substances, these substances easy to corrode the mirror;

3, mirror to use a soft dry cloth or cotton wipe, to prevent the mirror was scrub;

4, available soft cloth or emery cloth, dipped in some kerosene or wax wipe;

5, wipe the mirror with a cloth dampened with milk, the frame can make it clear and bright;

6, before bathing, soap can be coated with a mirror, and then wipe with a dry cloth, the mirror that is the formation of a layer of soap liquid film, can prevent the mirror blurred;

7, with a dry wipe dipped in the amount of detergent Ling painted in the mirror, evenly wiped. Wash the spirit of the active ingredient, can effectively prevent the water vapor in the mirror condensation, can play a very good anti-fog effect;

8, can also use the convergence of the make-up water or detergent;

9, with oil-absorbing paper rub, the effect is good.

Currently on the market with anti-fog mirror for sale, mainly coated anti-fog mirror and electric anti-fog mirror. The former through the coating micropores to prevent the mist layer; the latter through the electric heating to mirror humidity, fog quickly evaporate, which can not form a fog layer, the value of this mirror is not cheap. How does the glass mirror produce it? Glass production process includes: ingredients, melting, forming, annealing and other processes. Respectively, as follows:

1. Ingredients, according to the design of a good material side, the various raw materials after weighing in a mixing machine mixed evenly. The main raw materials of glass are: quartz sand, limestone, feldspar, soda ash, boric acid and so on.

2. Melting, will be equipped with a good raw material through the high temperature heating, forming a uniform bubble-free glass. This is a very complicated physical and chemical reaction process. The melting of the glass is carried out in the furnace. There are two main types of melting furnace: one is the crucible kiln, glass frit in the crucible, heated outside the crucible. Small crucible kiln only put a crucible, large can be more than 20 crucible. The crucible kiln is produced by the gap, and now only optical glass and colored glass are produced using crucible kilns. The other is the pool kiln, glass frit in the kiln melting, open fire in the upper surface of the glass heating. Glass melting temperature mostly in the 1300 ~ 1600 ゜ C. Most of the use of flame heating, there are a small amount of current heating, known as the melting furnace. Now, the pool kiln are continuous production, a small pool kiln can be a few meters, large can be as large as 400 meters.

3. Forming, is to melt a good glass into a fixed shape of solid products. Forming must be carried out within a certain temperature range, which is a cooling process, the first glass from the viscous liquid into a plastic, and then into a brittle solid. The forming method can be divided into two categories: artificial forming and mechanical forming.